Metal corrugated hose joints are used to connect metal hoses to other parts. According to the different connection methods, they can be divided into card sleeve joints, external thread joints, reducing joints, etc. Which connection situations does these different types of metal corrugated hose joints apply to? Come check it out with Qinhuangdao FECT industry Co., Ltd..
(1) External threaded joint: It mainly used for the connection between the local junction box and the metal corrugated hose. Open a hole in the local box, insert the connector, and fix it with a lock nut.
(2) Female threaded joint: It mainly used for the threaded connection between the cable tube and the metal corrugated hose.
(3) Card sleeve type joint: It is mainly used for the connection between metal corrugated hose and steel pipe. The installation of the card sleeve joint does not need to be threaded on the steel pipe. The joint is at the end of the steel pipe, and it is fastened with one click, which has the characteristics of convenient installation.
(4) Plug-in joint: It is mainly used for pre-embedded pipes with small dense gaps, inserted into the inner of metal corrugated hoses, and easy to install.
(5) Reducer joint: It is mainly used in the case that the diameter of the steel pipe and the metal hose is inconsistent, and can be arbitrarily enlarged or reduced according to the on-site installation requirements.
Due to the different structural designs of these joints, the connection methods used to connect metal corrugated hoses also have their own characteristics. Users should choose the corresponding metal corrugated hose connection method according to the needs of the application site and the characteristics of the connection situation.Qinhuangdao FECT industry Co., Ltd. hope the above introduction can be used as a reference for your choice.
